MAGUS GIT1 sklenená vložka stolíkaPríslušenstvo pre obrátený stolík mikroskopuSklenená vložka disponuje priemerom 118 mm a montuje sa na stolík inverzného mikroskopu. Je vhodný na prácu so vzorkami, ktoré majú priesvitnú štruktúru. Sklenená vložka je dôležitým príslušenstvom pre mikroskopické stolíky, ktoré zaisťujú stabilnú a čistú plochu pre umiestnenie vzoriek a preparátov počas mikroskopického skúmania. Vložka je navrhnutá tak, aby zlepšila používateľský komfort a zaistila vysokú presnosť a kvalitu mikroskopických skúmaní.Sklenená vložka MAGUS GIT1 je vyrobená z prvotriedneho skla, ktoré je odolné voči poškriabaniu a chemickým látkam. Vďaka tomu je zaistená dlhá životnosť a spoľahlivosť pri pravidelnom používaní v laboratórnom prostredí. MAGUS GIT1 je presne rezaná, aby dokonale zapadla do mikroskopických stolíkov. Rozmery vložky sú optimalizované pre rôzne druhy mikroskopov, čo je zásluhou univerzálnej kompatibility a jednoduchej inštalácie.Sklenený povrch sa ľahko čistí a dezinfikuje, čo je veľmi dôležité pre udržanie hygienických podmienok v laboratóriách. Povrch sklenenej vložky je odolný voči bežným laboratórnym čistiacim prostriedkom a dezinfekčným roztokom. Hladké hrany a zaoblené rohy vložky MAGUS GIT1 minimalizujú riziko poranenia pri manipulácii. Táto bezpečnostná funkcia je veľmi dôležitá v prostredí v ktorom sa často pracuje s krehkými a ostrými predmetmi. Sklenená vložka vám poskytne čistý a rovný povrch, ktorý minimalizuje optické skreslenie a zlepšuje kvalitu zobrazenia preparátov pod mikroskopom. Je to nevyhnutné pre presné a detailné pozorovania. Sklenená vložka mikroskopického stolíka MAGUS GIT1 je potrebným príslušenstvom pre každé laboratórne pracovisko. Prostredníctvom nej môžete dosiahnuť vysokú presnosť a kvalitu pri pozorovaní a analyzovaní mikroskopických preparátov. Odolnosť, jednoduchá údržba a bezpečný dizajn zo sklenenej dosky robia ideálny nástroj pre profesionálne laboratóriá, vzdelávacie inštitúcie aj priemyselné výskumy.Vlastnosti:✓ Sklenená vložka stolíka MAGUS GIT1✓ Priemer 118mm✓ Veľkosť balenia 14x14x3 cm ✓ Prepraná hmotnosť 0,12kgKompatibilita:✓ Biologický inverzný mikroskop MAGUS Bio V350✓ Fluorescenčný inverzný mikroskop MAGUS Lum V500✓ Fluorescenčný inverzný mikroskop MAGUS Lum V500L
Pracovný, mechanický stolík pre stereomikroskopy MAGUS XY5Dvojosý, pre prácu v prechádzajúcom a odrazenom svetlePracovný stolík MAGUS XY5 je potrebné namontovať na základňu stereomikroskopu MAGUS. Stolík je skvelý na presné a ľahké umiestňovanie preparátu pod objektív pre vizuálne skúmanie a vytvorenie fotografií. Pomocou otáčania koaxiálnych gombíkom môžete preparátom pohybovať pozdĺž osi X vpravo-vľavo a Y dopredu-dozadu.Priehľadný sklenený povrch pracovného stolíka MAGUS XY5 vám umožní pracovať v odraz
These polarization devices are used for polarized light observations. They include a rotating polarizer (90° rotation) that is placed on the collector and an analyzer that is mounted in a slot above the revolving nosepiece. The intensity of illumination depends on the mutual arrangement of these two devices. When they are perpendicular to each other, the sample is completely darkened. Compatibility: Magus Bio 230B Biological Microscope Magus Bio 230BL Biological Microscope Magus Bio 230T Biological Micro
The 15x magnification eyepiece is suitable for 4x, 10x, 20x, and 40x objectives. It is designed to fit into an eyepiece tube 30mm in diameter. The eyepiece has no adjustment to compensate for the user’s vision (diopter adjustment). If this is necessary, we recommend using an eyepiece with a microscope that has a diopter adjustment ring on the eyepiece tube. You can look through the eyepiece at a distance of up to 10mm, which is very convenient for those who wear glasses. Compatibility: MAGUS Bio 250B B
The 12.5x eyepiece is designed for 4x, 10x, 20x, 40x, 60x, and 100x objectives. It is compatible with a 30mm eyepiece tube. The eyepiece has no diopter adjustment mechanism to match the observer’s eyesight. You can adjust the focus on the microscope, which is equipped with a diopter adjustment ring (located on the eyepiece tube). The eyepiece has a 10mm eye relief, which makes it convenient to observe with glasses. Compatibility: MAGUS Bio 250B Biological Microscope MAGUS Bio 250BL Biological Microscop
This eyepiece has 25x magnification for use with 4x and 10x objectives. This model does not have a diopter adjustment ring. If it is necessary to adjust the focus to match the observer’s vision, you should use the eyepiece with a microscope that features a diopter adjustment ring that is located on the eyepiece tube. The eye relief is 10mm and, therefore, the observer can view while wearing glasses. The diameter of the eyepiece tube is 30mm. Compatibility: MAGUS Bio 250B Biological Microscope MAGUS Bio
The 12.5x magnification eyepiece is used for 4x, 10x, 20x, 40x, 60x, and 100x objectives. The eyepiece is mounted in a 30 mm diameter tube. This model has a diopter adjustment ring to compensate for the user’s vision. This means that the eyepiece can be used with microscopes that do not have an adjustment ring on the eyepiece tube. If the microscope has such a mechanism, the focus can be adjusted either on the eyepiece or on the microscope. The 10mm eye relief makes it comfortable to observe while wearing
This eyepiece is for MAGUS microscopes. It provides 20x magnification and can be used with 4x, 10x, and 20x objectives. The special feature of this eyepiece is the diopter adjustment ring, which can adjust the focus to compensate for the user’s vision. If the eyepiece is used with a microscope with diopter adjustment, the focus can be adjusted in two ways. The MAGUS MD20 20x/12mm eyepiece is mounted into an eyepiece tube 30mm in diameter. A 10mm eye relief is designed for comfortable observation when wear
MAGUS ZFA050 adaptér typu C-mountS nastaviteľnou ohniskovou vzdialenosťou. Zväčšenie: 0,5xMAGUS YFA050 je adaptér typu C-mount, ktorý má nastaviteľnú ohniskovú vzdialenosť, a je určený na inštaláciu digitálneho fotoaparátu do trinokulárneho tubusu trinokulárneho mikroskopu MAGUS. Zväčšenie adaptéra dosahuje 0,5x. Maximálne zorné pole bez vinetácie získate so snímačmi 1/2,5" až 2/3".Vhodné pre:✓ Digitálny fotoaparát MAGUS CBF10✓ Digitálny fotoaparát MAGUS CBF30✓ Digitálny fotoaparát MAGUS CBF50✓ Digitálny
MAGUS P32 montážny kolíčekPre stereomikroskopyMontážny kolíček MAGUS P32 je pomocný spojovací prvok stereomikroskopu. Je určený na montáž držiaka na zaostrovanie MAGUS FM3 na stojany MAGUS UT1 a MAGUS UT3.Priemer montážneho kolíka je 32 mm.Jednoduchá a intuitívna montáž je výhodou montážneho kolíčka MAGUS P32. Vďaka ergonomickému dizajnu a optimalizovanému tvaru je montáž rýchla a bezproblémová. Pre maximálnu bezpečnosť a spoľahlivosť je montážny kolíček MAGUS P32 podrobený prísnym kontrolám kvality. Každ
This eyepiece has 20x magnification and a 12mm field of view for 4x, 10x, and 20x objectives. The eyepiece has no diopter adjustment to compensate for the user’s vision (diopter adjustment). It is possible, however, when used with a microscope that has a diopter adjustment ring (the ring is located on the tube). The eye relief is 10mm, which means that the eyepiece is convenient for those who wear glasses. It is mounted into an eyepiece tube 30mm in diameter. Compatibility: MAGUS Bio 250B Biological Mi
This condenser is for use in the darkfield microscopy technique. It is used to study unstained transparent samples with low light absorption that cannot be seen while using the brightfield techniques. It only works with dry (non-immersion) objectives with an aperture of up to 0.9, providing magnification in the range of 4x to 60x. The MAGUS DF1 A 0.9 darkfield condenser is mounted on the microscope instead of the Abbe condenser for the brightfield microscopy. The optimal contrast of the image is achieved
This darkfield condenser has a 1.36–1.25 N.A. It is intended for obtaining a contrast image of unstained transparent samples, which cannot be seen with the brightfield microscopy technique. It is used with objectives with magnifications over 20x, including oil-immersion objectives. The immersion oil should be used for both dry and oil objectives; otherwise, the light will not reach the sample. The MAGUS DF2 A condenser is mounted on the microscope instead of the Abbe condenser and centered with two screw
This darkfield slider (plate) is for MAGUS microscopes. It was designed for studying unstained transparent samples that can only be viewed using the darkfield technique. The slider has two holes: one with a built-in darkfield aperture and the other is free for the brightfield technique. Due to this design, you can quickly change the microscopy technique. The MAGUS DFS1 slider is installed in the slot of the Abbe condenser. The plate is only used when working on non-oil (dry) objective with an aperture les
The universal stand enlarges the working area and provides more freedom in choosing the position of the microscope head above the workstation. The MAGUS UT3 stand features a reinforced double arm to move the microscope head in parallel relative to the table surface. The height and sideways position are adjustable. The stand is intended for mounting MAGUS Stereo 7BH , Stereo 7TH , Stereo 8BH , and Stereo 8TH microscope heads with MAGUS FM2 and FM3 focusing mechanisms. The MAGUS P32 mounti
The infinity plan achromatic objective, 20x magnification and maximum resolution of 0.69µm. This objective is used for studying samples from 1µm over a wide field of view, e.g., in urine or blood tests (determination of leukocytes, erythrocytes, cylinders, and other constituents). Due to its minimal distortions, the plan aromatic objective can also be used for digital photography and together with wide-field eyepieces (22mm field of view). The MAGUS MA20 20x/0.40 objective has chromatic correction for blu